Download Check Point Certified Maestro Expert - R81.X.156-836.VCEDumps.2024-03-26.36q.vcex

The g_all prefix is used to run commands globally in Expert mode on all Security Group Members of the current Security Group. For example, g_all cpstop will stop the Check Point services on all SGMs. The other prefixes are not valid for global commands in Expert mode.Reference* Check Point Certified Maestro Expert (CCME) R81.X Courseware, Module 4: Using the Command Line Interface and WebUI, Lesson 4.3: Global Commands, page 4-11* Check Point R81 Maestro Administration Guide, Chapter 4: Using the Command Line Interface and WebUI, Section: Global Commands, page 4-9* Global Expert Mode Commands - Check Point CheckMates

The g_update_conf_file command is a global command that allows users to update the specified file on all Security Group Members of the current Security Group. The command takes the file name and the parameter-value pair as arguments and updates the file accordingly. For example, g_update_conf_file fwkern.conf fwha_enable_arp=1 will add or modify the fwha_enable_arp parameter in the fwkern.conf file on all SGMs.Reference* Check Point Certified Maestro Expert (CCME) R81.X Courseware, Module 4: Using the Command Line Interface and WebUI, Lesson 4.3: Global Commands, page 4-12* Check Point R81 Maestro Administration Guide, Chapter 4: Using the Command Line Interface and WebUI, Section: Global Commands, page 4-10* Maestro Commands for Security Groups - Check Point CheckMates

Reference* Check Point Certified Maestro Expert (CCME) R81.X Courseware, Module 2: Maestro Security Groups, Lesson 2.2: Security Group Configuration, page 2-10* Check Point R81 Maestro Administration Guide, Chapter 2: Maestro Security Groups, Section: Security Group Configuration, page 2-9* Security Group Configuration - Check Point Software

The MHO (Maestro Hyperscale Orchestrator) does not require a license by itself, but each SGM (Security Group Module) that is attached to the MHO needs a license. The license type depends on the features and blades that are enabled on the SGM. For example, if the SGM is running VSX, it needs a VSX license.* Maestro Expert (CCME) Course - Check Point Software, page 71* Check Point Certified Maestro Expert (CCME) R81.X - Global Knowledge, course outline

* The Quantum Maestro Orchestrator uses the Distribution Mode to assign incoming traffic to Security Group Members.Reference: Working with the Distribution Mode

Uplink interfaces are used to connect Maestro Hyperscale Orchestrators (MHOs) to the customer's network infrastructure, such as switches, routers, or firewalls. They are also used to send and receive management and control traffic from the customer's network to the MHOs.* Maestro Expert (CCME) Course - Check Point Software, page 41* Check Point Certified Maestro Expert (CCME) R81.X - Global Knowledge, course outline

The lldpctl command is a tool to display information about the devices discovered by the Link Layer Discovery Protocol (LLDP) on all ports of the Maestro Orchestrator and the Security Group Members. LLDP is a protocol that enables devices to exchange information about their identity, capabilities, and configuration. LLDP can help to discover the topology and connectivity of the Maestro environment. The output of lldpctl can show the serial number, appliance model, and orchestrator's IP of the connected devices, but it cannot show the distribution mode of the Security Group. The distribution mode is the algorithm that determines how the Maestro Orchestrator distributes the traffic among the Security Group Members. To view the distribution mode, other commands such as asg monitor or asg stat can be used.Reference* Check Point Certified Maestro Expert (CCME) R81.X Courseware, Module 4: Using the Command Line Interface and WebUI, Lesson 4.2: LLDP, page 4-9* Check Point R81 Maestro Administration Guide, Chapter 3: Working with Security Group Modules, Section: LLDP, page 3-9* Check Point R81 Maestro Administration Guide, Chapter 2: Maestro Security Groups, Section: Traffic Distribution, page 2-7* Maestro basic setup documentation - Page 2 - Check Point CheckMates* Log and Configuration Files - Check Point Software

The Management ports located on the Rear Panel of the Orchestrator MHO-140 are out-of-band interfaces that provide access to the Orchestrator itself for configuration and management purposes. They are not used for traffic distribution or connectivity to the Security Groups or the external networks. They are 1Gbps RJ-45 ports that can be connected to a switch or a router.Reference* Maestro Hyperscale Orchestrator Datasheet - Check Point Software1, page 2* Quantum Maestro Getting Started Guide - Check Point CheckMates2, page 4

The correct interfaces to connect to Orchestrator 1 for downlinks' intra-orchestrator redundancy when using two Orchestrators are Port 1 in Slot 1 and Port 1 in Slot 2. This is because each slot represents a different NIC, and each port represents a different physical link. By connecting two ports from different slots, the appliance can have redundant connections to the same orchestrator, and avoid a single point of failure in case of a NIC or link failure.Reference* Check Point 156-835 Certification Flashcards | Quizlet1* Maestro Expert (CCME) Course - Check Point Software, page 182* Maestro Technical Training, Module 2: Maestro Security Groups and the Single Management Object, slide 163